HomeLatest NewsAccessoriesServices
Exhibition DatesContact Me
 

Lineside figures & Accessories
7mm Scale

Including.. Road / Rail , Station Fittings, Track Fittings, Diesel Depot Fittings,

Diesel Maintenance Fittings & Complete Kits

FIGURES
Unpainted £2.75
Painted £6.50

 

PW 12 Train Driver

PW13 Train Driver

PW1

Kneeling Forward with small o/e spanner

PW 2

Standing with Mobile Phone

PW3

Standing with Large fishplate adjuster

PW 4

Laying down

PW 5

Kneeling Upright with both hands forward

PW 5a

PW6

Standing with Tester / AVO on shoulder

PW7

Standing lookout with 2 flags

PW8

Welder (ARC)

PW9

Welder ( Gas)

PW 10 & PW 11

Seated with High Vis Jacket / Trousers and Wooley hat / Baseball Cap

PW 14

Standing with High Vis waistcoat, Hands in pockets ( The Boss !)

Lineside Fittings

LS1

Linespeed Signs £4.00

LS2

Standard Eqipment Box £3.50

LS3

Standard Equipment Box and Base £7.00

LS4

Oil Cylinder Unit £2.50

LS5

Drain and Manhole Covers £3.00

LS6

Security Fencing 6' Chain Link (282mm), Post and Barbed Wire £6.00

LS7

Barbed Wire Fencing (292mm) Including posts £2.50

LS8

Post Mounted Equipment boxes £2.50

LS9

Footpath Crossing £4.50

LS10

Early style Equipment Box £4.00

LS 11

Emergency Telephones £4.00

LS 12

London Underground Equipment Boxes £3.00

LS 13

London Underground Cable Hangers (5) £3.00

LS 14 Single Lineside Box    £3.00 Picture to follow shortly

Road Rail

RR1

Lifting Half Barrier Level Crossing ( Pair) £15.00

RR3

Cattle Grid Castings £2.00

RR4

Road Sign Set £6.00

RR5

Automatic Open Crossing Set £6.50

Station Fittings

S1

Station Shelter 18' £9.00

S2

Ticket Barrier £5.50

S3

Station Seat £2.50

S4

Station Nameboards £2.00

S5

Station Trolley (2) £4.50

S6

Brute Trolley £4.00

S7

Modern Phone box £5.50

S8

Concrete Cycle Stands (6) £1.50

S9

Station Fencing 5' Chain link & Posts £5.50

S12

Litter Bins (2 x Wall mounted ) £1.25

S12A

Litter Bins (2x Free Standing) £2.50

S13

Platform Drains £1.25

S14

Station Lamps ( Non Working) £2.50

S15

Office Windows (2) Etched £3.00

Track Fittings

T1

Mainline Point Control £4.25

T2

Point Heater £1.25

T3

AWS Ramp £2.50

T4

3 Aspect Ground Signal ( Non Working ) £1.50

T5

Ponit Heater Control Box £2.50

T6

Manual Point Lever £2.50

T7

Conductor Third Rail Chairs (12) £1.50

T8

TPWS Toastrack £2.00

T9

Clamp Locks (4) £1.50

Diesel Depot Fittings

DD1

12ft Safety Barrier (3) £5.00

DD2

Storage Pallets (2) £1.50

DD3

Tail Lamps (3) £1.25

DD4

Brake Shoes (10) £1.50

DD5

Diesel Depot Door Unit £10.00

DD6

Traction Motor £4.00

DD7

Wire Bin Set (2 Bins, 4 Not To Be Moved Signs, 3 Snowploughs ) £7.00

DD8

Pallet Load, Oleo Buffers (4) £2.50

DD9

Pallet Load, Springs £2.50

Diesel Maintenance Fittings

DM1

Manual Locomotive Jack £2.00

DM2

Locomotive Servicing Trestles £2.00

DM3

Inspection Platform & Ladder £7.50

DM4

Synchronised Locomotive Jack (2) £10.00

DM5

Not To Be Moved Signs £1.25

Complete Kits

CC1

Diesel Fuelling Point £18.00

CC2

Diesel Fuel Storage Tank £27.00

CC3

Half Relief Rail Bridge £17.50

Lineside Accessories

Arc Welder Simulation (Electronic)                                                    £13.50

Having observed various attempts at this effect, it was obvious that existing products did not truly represent the action of an arc welder. Considerable research, and observation of the real thing, [through goggles], has led to the development of this visual simulator. We believe that this produces the closest approximation to the sight of an arc welder in action. A major criticism of previous efforts has been the repetitive nature of the effect, in the simulator the 'arc' is of a totally random duration and frequency.

There is another effect to add to the realism, but to appreciate this it must be seen. To get the full benefit, go to your local steel fabricator, and watch them at work for some time, not just a quick look! Then, spend at least ten minutes seeing ours in action. We will be surprised if you don’t agree this is the BEST! Since we think it is so much better, it is going to cost more than others, but if you want realistic operation. Connect the yellow/black wires to a supply, AC or DC 12/15V. Exercise due patience, and observe, [it can take several minutes before anything happens!] If, as is likely, it is necessary to cut the wires to install the unit on a model, take careful note of the connections and wire colours before cutting. A high power building version is also available.